Remote mount high specification patented chandelier winch designed and manufactured for effortless use for chandelier bulb changing, maintenance and cleaning.
This chandelier is designed so the motor unit can be remotely mounted and does not have to be above the chandelier. This is particularly useful where space is restricted above the chandelier.

This chandelier winch will lift chandeliers and other lighting units up to 136kg.
Maximum lift is 10.7m as standard, but can be purchased with a lift of 19.8m or 27.4m if extra lift is required. The standard unit is actually supplied with a 20m wire rope to allow for the routing of the wire rope around any pulleys and back to the motor.
An advantageous feature of this chandelier winch is that it has a separate lighting and motor circuit which means that it can be used with a lighting dimmer switch.
Maximum lighting capacity for chandelier light bulbs is 1.56kW standard and this can be increased to 2.2kW, 3.3kW or 4.4kW if required.
The dimensions of the motor unit which is installed remotely are 35.5cm wide, 48.5 cm long and 23cm high.
The dimensional of the chandelier pulley system and contact plate which is mounted above the chandelier is 10 cm diameter when viewed from below. This comes fitted to a mounting bracket of length 35cm which can be trimmed down to the length required.
These chandelier winches are rigorously tested and use the latest in electrical and gearing technology for long service life. The winch has a separate locking mechanism as a double safeguard.
Additional directional pulleys can be purchased to allow more complex cable routing.
There is a smart lift controller accessory available to allow programming of the stop positions.